HumiSeal Stripper 1063

Main features

Non-Acidic Polyurethane Removal
Controlled One-Hour Soak
Clear Low-Density Stripper

Product Description

HumiSeal Stripper 1063 is a non-acidic liquid stripper for dissolving cured HumiSeal polyurethane conformal coatings from printed wiring board assemblies. The clear product has a specific gravity of 0.84 +/- 0.01, a relative evaporation rate of 2.10, and a TCC flash point of 11.1 deg C. The stated removal process uses a 60 minute immersion, brushing of loosened material, final cleaning with isopropyl alcohol and deionized water or another qualified cleaner, inspection, and a 30 minute bake at 60 to 65 deg C after final cleaning.

Key features

Non-acidic polyurethane coating removal: The stripper is formulated to dissolve cured HumiSeal polyurethane conformal coatings.
Controlled 60-minute immersion: The documented process uses a one-hour soak before brushing and final cleaning.
Clear low-density liquid: The product is supplied as a clear liquid with a specific gravity of 0.84 +/- 0.01.

Applications

Removal of cured HumiSeal polyurethane coatings from printed wiring board assemblies

TDS, SDS & Technical Documents

Stripper_1063 TDS

English (Technical Data Sheet (TDS))

Technical Specifications

General Properties

Color

Clear

Evaporation Rate

2.1

Specific Gravity

0.82

Thermal Properties

Flash Point

11.1 °C

Additional Information

Technical properties

As-supplied / before-processing properties

Typical liquid properties and shelf life before the coating-removal process.

Property	Value	Unit	Method / condition
Appearance	Clear liquid	-	As supplied
Relative evaporation rate	2.10	-	Typical liquid value
Specific gravity	0.84 +/- 0.01	-	Typical liquid value
Flash point	11.1	deg C	TCC
Shelf life	12	months	As supplied in the original container