LOCTITE ABLESTIK G500
Harmonization Code : 3907.30.00.85 | Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms : Epoxide resins : Other
Main features
- One component
- General purpose
- Sag resistant
Product Description
LOCTITE ABLESTIK G 500 is a low viscosity, general purpose epoxy adhesive and sealant that cures to a high gloss finish.
LOCTITE ABLESTIK G 500 is non abrasive with excellent dielectric properties and resistance to heat and water. This heat curable adhesive is typically used for the insulation of copper and other materials and to attach leads to coils. It binds well on copper, rigid plastics and other metals.
Cure Schedule
- 60 minutes @ 125°C or
- 20 minutes @ 150°C or
- 5 minutes @ 175°C
ABLESTIK G 500
1. Select Package Type
Loading pricing…
Product availability 
Shipping in 57 days
Shipping in 12 weeks
Shipping in 50 days
Shipping in 57 days Shipping in 12 weeks Shipping in 50 daysTDS, SDS & Technical Documents
Technical Specifications
General Properties
Density
1450 kg/m3 Volumetric mass per unit
Electrical Properties
Dielectric Strength
15 kV/mm Dielectric strength is measured in kV per mm and is calculated by the Breakdown voltage divided by the thickness of the tested material.
Those two properties go hand in hand and while Breakdown voltage is always thickness dependent, dielectric strength is a general material property.
As an example, the dielectric strength of Polyimide is 236 kV/mm. If we place 1mm of Polyimide between two electrodes, it will act as an insulator until the voltage between the electrodes reaches 236 kV. At this point it will start acting as a good conductor, causing sparks, potential punctures and current flow.
Volume Resistivity
200000000000000 Ohms⋅cm Volume resistivity, also called volume resistance, bulk resistance or bulk resistivity is a thickness dependent measurement of the resistivity of a material perpendicular to the plane of the surface.
