PERMABOND 2010
Harmonization Code : 3506.10.00.00 | Prepared glues and other prepared adhesives, not elsewhere specified or included; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg
Main features
- Thixotropic Vertical-Surface Control
- Up to 0.5 mm Gap Filling
- 25 kV/mm Dielectric Strength
Product Description
PERMABOND® 2010 Cyanoacrylate Adhesive is a thixotropic, fast-setting, single-component ethyl cyanoacrylate adhesive designed for vertical, porous, and gap-filling applications. Its semi-gel consistency helps resist running and supports controlled dispensing on metals, plastics, elastomers, ceramics, and wood. At 25 °C, the adhesive provides a viscosity of 2,000–2,500 mPa·s at 20 rpm and 10,000–20,000 mPa·s at 2 rpm, reflecting its thixotropic behavior. It fills gaps up to 0.5 mm and typically reaches handling strength in 10–15 seconds on steel, Buna N rubber, and phenolic, with full strength developing in 24 hours.
Key features
- Thixotropic semi-gel consistency: Helps prevent running on vertical surfaces while supporting accurate dispensing and placement.
- Maximum gap-filling capability: Suitable for joints with gaps up to 0.5 mm.
- Fast fixture performance: Typical handling strength is achieved in 10–15 seconds on steel, Buna N rubber, and phenolic.
Applications / Suitable for
- Vertical bonding applications
- Porous substrates
- Gap-filling joints up to 0.5 mm
- Bonding metals, plastics, elastomers, ceramics, and wood
- High-speed industrial assembly
TDS, SDS & Technical Documents
Technical Specifications
General Properties
Physical Properties
Mechanical Properties
Thermal Properties
Electrical Properties
Additional Information
As-supplied / before-processing properties
Typical uncured and curing properties. Values are guideline information and do not constitute product specifications.
| Property | Value | Unit | Method / condition |
|---|---|---|---|
| Chemical composition | Ethyl cyanoacrylate | — | Single-component adhesive |
| Appearance | Colorless semi-gel | — | Thixotropic consistency |
| Viscosity | 2,000–2,500 | mPa·s | At 25 °C and 20 rpm |
| Viscosity | 10,000–20,000 | mPa·s | At 25 °C and 2 rpm |
| Specific gravity | 1.1 | — | Typical uncured value |
| Maximum gap fill | 0.5 | mm | Equivalent source value 0.02 in |
| Fixture time — steel | 10–15 | s | Time to 0.3 N/mm² shear strength |
| Fixture time — Buna N rubber | 10–15 | s | Time to 0.3 N/mm² shear strength |
| Full strength | 24 | h | Typical full-strength development |
After-processing / final-state properties
Typical cured performance values. Bond strength varies with substrate, surface preparation, joint gap, and curing conditions.
| Property | Value | Unit | Method / condition |
|---|---|---|---|
| Shear strength — steel | 19–23 | N/mm² | ISO 4587; equivalent source range 2,800–3,300 psi |
| Shear strength — aluminum | 7–9 | N/mm² | ISO 4587; equivalent source range 1,000–1,300 psi |
| Shear strength — zinc | 10 | N/mm² | ISO 4587; equivalent source value 1,500 psi |
| Shear strength — phenolic | 14 | N/mm² | ISO 4587; equivalent source value 2,000 psi |
| Impact strength | 3–5 | kJ/m² | ASTM D950 |
| Hardness | 85 | Shore D | ISO 868 |
| Dielectric strength | 25 | kV/mm | Typical cured electrical property |
| Thermal conductivity | 0.1 | W/(m·K) | Typical cured thermal property |
